HP Presario X1200 HP and Compaq Notebook PC Series - Maintenance and Service G - Page 131
Remove the PM2.5×15.0, Remove the VGA board and shield
View all HP Presario X1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Removal and Replacement Procedures 2. Remove the PM2.5×15.0 1 and PM2.0×3.0 2 screws that secure the VGA board shield to the base enclosure. 3. Lift the upper left corner of the VGA board 3 to disconnect it from the system board. 4. Remove the VGA board and shield 4. 5. Disengage the shield clips 5 to remove the VGA board from the shield. Removing the VGA Board and Shield Maintenance and Service Guide 5-41
Removal and Replacement Procedures
Maintenance and Service Guide
5–41
2. Remove the PM2.5×15.0
1
and PM2.0×3.0
2
screws that
secure the VGA board shield to the base enclosure.
3. Lift the upper left corner of the VGA board
3
to disconnect
it from the system board.
4. Remove the VGA board and shield
4
.
5. Disengage the shield clips
5
to remove the VGA board from
the shield.
Removing the VGA Board and Shield