HP Presario X1200 HP and Compaq Notebook PC Series - Maintenance and Service G - Page 135
slot board cable ground loop to the base enclosure and the, PM2.5×5.0 screw
View all HP Presario X1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Removal and Replacement Procedures 2. Disconnect the SD Card slot board cable 1 from the system board. 3. Remove the PM2.5×5.0 screw 2 that secures the SD Card slot board cable ground loop to the base enclosure and the PM2.5×5.0 screw 3 that secures the system board to the base enclosure. Removing the System Board Screws Maintenance and Service Guide 5-45
Removal and Replacement Procedures
Maintenance and Service Guide
5–45
2. Disconnect the SD Card slot board cable
1
from the system
board.
3. Remove the PM2.5×5.0 screw
2
that secures the SD Card
slot board cable ground loop to the base enclosure and the
PM2.5×5.0 screw
3
that secures the system board to the base
enclosure.
Removing the System Board Screws