HP ProBook 4325s HP ProBook 4325s, 4326s and 4425s Notebook PCs - Maintenance - Page 100
USB connector board, Battery, on Switch cover, Keyboard, Optical drive, Speakers, Palm rest
View all HP ProBook 4325s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
USB connector board Description USB board with cable Spare part number 599524-001 Before removing the USB connector assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 44). 5. Remove the following components: a. Switch cover (see Switch cover on page 46) b. Keyboard (see Keyboard on page 48) c. Optical drive (see Optical drive on page 52) d. Speakers (see Speakers on page 55) e. Palm rest (see Palm rest on page 60) f. Hard drive (see Hard drive on page 63) g. Display assembly (see Display assembly on page 78) h. Top cover (see Top cover on page 86) i. System board (see System board on page 90) Remove the USB connector assembly: 1. Position the computer right-side up with the right side toward you. 2. Release the USB connector board cable from the base enclosure clips and routing channel (1). 92 Chapter 4 Removal and replacement procedures