HP ProBook 4325s HP ProBook 4325s, 4326s and 4425s Notebook PCs - Maintenance - Page 57
from the system board., Remove the keyboard
View all HP ProBook 4325s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
2. Slide the keyboard back toward the display. 3. Rotate it right until it rests upside down on the right side of the computer. 4. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and disconnect the keyboard cable (2) from the system board. 5. Remove the keyboard (3). Component replacement procedures 49
2.
Slide the keyboard back toward the display.
3.
Rotate it right until it rests upside down on the right side of the computer.
4.
Release the zero insertion force (ZIF) connector
(1)
to which the keyboard cable is attached, and
disconnect the keyboard cable
(2)
from the system board.
5.
Remove the keyboard
(3)
.
Component replacement procedures
49