HP ProBook 4325s HP ProBook 4325s, 4326s and 4425s Notebook PCs - Maintenance - Page 72
straight up to remove it from the hard drive.
View all HP ProBook 4325s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
4. Remove the hard drive (2) from the hard drive bay. 5. If it is necessary to replace the hard drive bracket, remove the two Phillips PM3.0×3.0 hard drive bracket screws (1) from each side of the hard drive. 6. Lift the bracket (2) straight up to remove it from the hard drive. Reverse this procedure to reassemble and install the hard drive. 64 Chapter 4 Removal and replacement procedures
4.
Remove the hard drive
(2)
from the hard drive bay.
5.
If it is necessary to replace the hard drive bracket, remove the two Phillips PM3.0×3.0 hard drive
bracket screws
(1)
from each side of the hard drive.
6.
Lift the bracket
(2)
straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
64
Chapter 4
Removal and replacement procedures