HP ProBook 4325s HP ProBook 4325s, 4326s and 4425s Notebook PCs - Maintenance - Page 115
Some of the listed System Configuration options may not be supported by your computer., Computer
View all HP ProBook 4325s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
System Configuration menu NOTE: Some of the listed System Configuration options may not be supported by your computer. Select Language Boot Options Device Configurations To do this Change the Computer Setup language. ● Set a Startup Menu delay (in seconds). ● Enable/disable Custom Logo (disabled by default). ● Enable/disable Display Diagnostic URL (enabled by default). ● Enable/disable CD-ROM boot (enabled by default). ● Enable/disable SD Card boot (enabled by default). ● Enable/disable floppy boot (enabled by default). ● Enable/disable PXE Internal NIC boot (disabled by default). ● Set the Express Boot Popup delay in seconds. ● Set the boot order. ● Enable/disable USB legacy support (enabled by default). When enabled, USB legacy support allows the following: ◦ Use of a USB keyboard in Computer Setup even when a Windows® operating system is not running. ◦ Startup from bootable USB devices, including a hard drive, diskette drive, or optical drive connected by a USB port to the computer. ● Enable/disable fan always on while connected to an AC outlet (disabled by default). ● Enable/disable HP QuickLook. ● Enable/disable HP QuickLook preboot authentication on HP QuickLook boot. ● Enable/disable HP QuickWeb. ● Enable/disable HP QuickWeb: Write Protect (disabled by default). ● Enable/disable Virtualization Technology. ● Enable/disable Wake on USB (disabled by default). ● Enable/disable Numlock state at boot: Off /On (disabled by default). Computer Setup in Windows Vista and Windows XP 107