HP Q1581A HP StorageWorks DAT USB Tape Drives User Guide (DW049-90902, Novembe - Page 16
External drives, Power requirements, What are the mounting requirements for an internal tape drive?
UPC - 882780612716
View all HP Q1581A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Figure 4 USB cables . • A USB cable with a 4-pin Intel connector (blue) • A USB cable with a 4-pin ProLiant connector (red) • A standard USB cable NOTE: If your server does not have an internal USB port, you must purchase and install a separate USB HBA with an internal port before you install the tape drive. See http://www.hp.com/go/connect for recommended products. External drives A power cable is provided with your HP StorageWorks DAT tape drive. The USB 2.0 cable is pre-fitted to the tape drive, you cannot remove it. Power requirements Power requirements are: Table 2 Power requirements Voltage Typical Current 5 V 12 V DAT 320 0.70 A 0.25 A DAT 160 1.54 A 0.26 A DAT 72/40/ 24 0.7 A 0.3 A Maximum Current DAT 320 DAT 160 DAT 72/40/ 24 1.4 A 1.61 A 0.8 A 1.3 A 1.3 A 1.0 A What are the mounting requirements for an internal tape drive? Mounting bay You need one industry-standard, 5¼-inch, half-height bay in which to install the HP StorageWorks DAT tape drive. 16 Before you start