HP Q1581A HP StorageWorks DAT USB Tape Drives User Guide (DW049-90902, Novembe - Page 50

Expired cleaning cartridges, Handling cartridges, Getting the most out of cartridges and drives

Get HP Q1581A - StorageWorks DAT 160 USB External Tape Drive PDF manuals and user guides
UPC - 882780612716
View all HP Q1581A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

the drive. Replace the cleaning cartridge when all the boxes are checked. New cleaning cartridges are available from HP. 1. Insert a cleaning cartridge into the drive. The tape drive automatically loads the cartridge and cleans the heads. The Clean LED remains flashing and the Ready LED starts to flash. At the end of the cleaning cycle, the Clean LED turns off and the drive ejects the cartridge. The cleaning cycle takes approximately 30-60 seconds. 2. Remove the cleaning cartridge from the drive. The drive's TapeAlert feature will send a message to your backup application when the tape heads need cleaning or a cleaning cartridge has expired. Expired cleaning cartridges HP StorageWorks DAT 320 drives: If an expired cleaning cartridge is placed into the drive, the Clean LED remains flashing, and the Ready LED and Tape LED start to flash. The expired cleaning tape ejects automatically. (The Ready LED turns off, the Clean and Tape LEDs continue to flash. Discard the cleaning cartridge). Recovery from this condition is to insert a good cleaning cartridge. (The Tape LED will turn off immediately.) HP StorageWorks DAT 160 and DAT 72 drives: If the cleaning cartridge is not ejected, it has probably expired. In this case, press the Eject button, discard the cleaning cartridge and repeat the operation with a new one. HP StorageWorks DAT 40 drives: If the cleaning cartridge ejects in less than 20 seconds, it has probably expired. In this case, discard the cleaning cartridge and repeat the operation with a new one. Handling cartridges • Do not touch the tape media. • Do not attempt to clean the tape path or tape guides inside the cartridge. • Do not leave cartridges in excessively dry or humid conditions. • Do not leave cartridges in direct sunlight or in places where magnetic fields are present (for ex- ample, under telephones, next to monitors or near transformers). • Do not drop cartridges or handle them roughly. • Do not stick more than one label onto the cartridge label area; extra labels can cause the cartridges to jam in the drive. Stick labels onto the label area only. • See the insert included with the tape cartridge for storage conditions. Getting the most out of cartridges and drives • Use mostly the matching media type (DAT 320 media for HP StorageWorks DAT 320, DAT 160 media for HP StorageWorks DAT 160, DAT 72 media for HP StorageWorks DAT 72, DDS-4 media for HP StorageWorks DAT 40). • Use media for the recommended number of times (DAT 320, DAT 160, DAT 72 and DDS-4=100 full backups). Overuse of the tape will cause it to degrade and possibly shed tape debris in the drive. Too many new tapes can also cause wear of the drive as they are rougher than used ones. • Do not verify (DDS does read-after-write checking automatically). • Do not overload the server during backups. Maximize the transfer rate (run overnight with no other processes) and use incremental backups if convenient. 50 Use the correct media

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
the drive. Replace the cleaning cartridge when all the boxes are checked. New cleaning cartridges
are available from HP.
1.
Insert a cleaning cartridge into the drive. The tape drive automatically loads the cartridge and
cleans the heads. The Clean LED remains flashing and the Ready LED starts to flash.
At the end of the cleaning cycle, the Clean LED turns off and the drive ejects the cartridge. The
cleaning cycle takes approximately 30-60 seconds.
2.
Remove the cleaning cartridge from the drive.
The drive's TapeAlert feature will send a message to your backup application when the tape
heads need cleaning or a cleaning cartridge has expired.
Expired cleaning cartridges
HP StorageWorks DAT 320 drives:
If an expired cleaning cartridge is placed into the drive, the Clean
LED remains flashing, and the Ready LED and Tape LED start to flash. The expired cleaning tape ejects
automatically. (The Ready LED turns off, the Clean and Tape LEDs continue to flash. Discard the
cleaning cartridge). Recovery from this condition is to insert a good cleaning cartridge. (The Tape
LED will turn off immediately.)
HP StorageWorks DAT 160 and DAT 72 drives:
If the cleaning cartridge is not ejected, it has probably
expired. In this case, press the Eject button, discard the cleaning cartridge and repeat the operation
with a new one.
HP StorageWorks DAT 40 drives:
If the cleaning cartridge ejects in less than 20 seconds, it has
probably expired. In this case, discard the cleaning cartridge and repeat the operation with a new
one.
Handling cartridges
•
Do not touch the tape media.
•
Do not attempt to clean the tape path or tape guides inside the cartridge.
•
Do not leave cartridges in excessively dry or humid conditions.
•
Do not leave cartridges in direct sunlight or in places where magnetic fields are present (for ex-
ample, under telephones, next to monitors or near transformers).
•
Do not drop cartridges or handle them roughly.
•
Do not stick more than one label onto the cartridge label area; extra labels can cause the cartridges
to jam in the drive. Stick labels onto the label area only.
•
See the insert included with the tape cartridge for storage conditions.
Getting the most out of cartridges and drives
•
Use mostly the matching media type (DAT 320 media for HP StorageWorks DAT 320, DAT 160
media for HP StorageWorks DAT 160, DAT 72 media for HP StorageWorks DAT 72, DDS-4
media for HP StorageWorks DAT 40).
•
Use media for the recommended number of times (DAT 320, DAT 160, DAT 72 and DDS-4=100
full backups). Overuse of the tape will cause it to degrade and possibly shed tape debris in the
drive. Too many new tapes can also cause wear of the drive as they are rougher than used ones.
•
Do not verify (DDS does read-after-write checking automatically).
•
Do not overload the server during backups. Maximize the transfer rate (run overnight with no
other processes) and use incremental backups if convenient.
Use the correct media
50