HP R1500 HP UPS R3000 User Guide - Page 26
Switching on the ERM circuit breaker, Charging the ERM batteries
View all HP R1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Plug the ERM cable (1) in the socket (2) at the rear of the UPS. NOTE: To install a second ERM, plug the cable from the second ERM into the socket at the rear of the first ERM. Up to two ERM units can be connected. Switching on the ERM circuit breaker Charging the ERM batteries Connect the UPS to a grounded utility power outlet. When the UPS is plugged in, the unit automatically enters Standby mode and begins charging the ERM batteries. Allow 24 hours for the ERM to fully charge. Installation 26
Installation 26
Plug the ERM cable (1) in the socket (2) at the rear of the UPS.
NOTE:
To install a second ERM, plug the cable from the second ERM into the socket at the
rear of the first ERM. Up to two ERM units can be connected.
Switching on the ERM circuit breaker
Charging the ERM batteries
Connect the UPS to a grounded utility power outlet. When the UPS is plugged in, the unit automatically
enters Standby mode and begins charging the ERM batteries. Allow 24 hours for the ERM to fully charge.