HP RP36000/3 HP 3 Phase UPS User Guide - Page 61
cutouts, then tighten the brackets.
View all HP RP36000/3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3. Install the mounting ears on the chassis using the screws provided. 4. With one person on each side, lift the chassis to rail level and slide the chassis on the mounting rails. 5. Attach the chassis to the rack using the supplied screws. 6. If using the rear mounting brackets, be sure that the bracket tabs are fully inserted into the rear panel cutouts, then tighten the brackets. The UPS auto-detects ERM installation by updating the system runtime. If the system runtime is not updated, verify installation or see "Troubleshooting (on page 94)" . ERM installation 61
ERM installation 61
3.
Install the mounting ears on the chassis using the screws provided.
4.
With one person on each side, lift the chassis to rail level and slide the chassis on the mounting rails.
5.
Attach the chassis to the rack using the supplied screws.
6.
If using the rear mounting brackets, be sure that the bracket tabs are fully inserted into the rear panel
cutouts, then tighten the brackets.
The UPS auto-detects ERM installation by updating the system runtime. If the system runtime is not updated,
verify installation or see "Troubleshooting (on page
94
)" .