HP Server rp7420 Installation Guide, Fifth Edition - HP 9000 rp7420 Server - Page 42
Lift Handles Mounted, To lift the server
View all HP Server rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Unpacking the Server Unpacking a Non-Racked Server 5. Pull the string plunger out, move the handles apart, and install the shoulder washer end of the panel into the keyway feature. Figure 2-11 Lift Handles Mounted 6. Continue to pull the handles apart until the spring plunger snaps into final position. The spring plunger will drop down into the recess position. 7. Ensure that the handles are secure by pressing the handles together and moving back and forth. 8. Repeat steps 3 through 7 for the other handle. 9. To lift the server, rotate the handles 90 degrees to horizontal position. NOTE If installing the system in a rack, refer to the installation guide, HP J1530B rack installation kit. 10. After moving the server, remove the lift handle panels from the chassis and reinstall the server covers and front bezel. Refer to the installation guide, HP J1530B rack installation kit. 42 Chapter 2