HP Server rp7420 Installation Guide, Fifth Edition - HP 9000 rp7420 Server - Page 66

Setting Up the Customer Engineer Tool (PC), Setting CE Tool Parameters

Get HP Server rp7420 PDF manuals and user guides View all HP Server rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Cabling and Power Up MP Core I/O Connections Setting Up the Customer Engineer Tool (PC) The Customer Engineer (CE) Tool is usually a laptop. It allows communication with the MP in the HP 9000 rp7420 Server. The MP monitors the activity of either a one partition or a multiple-partition configuration. During installation, communicating with the MP enables such tasks as: • Verifying that the components are present and installed correctly • Setting LAN IP addresses • Shutting down cell board power Communication with the MP is established by connecting the CE Tool to the local RS-232 port on the MP Core I/O card. Setting CE Tool Parameters After powering on the CE Tool, ensure the communications settings are as follows: • 8/none (parity) • 9600 baud • na (Receive) • na (Transmit) 66 Chapter 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Chapter 4
Cabling and Power Up
MP Core I/O Connections
66
Setting Up the Customer Engineer Tool (PC)
The Customer Engineer (CE) Tool is usually a laptop. It allows communication with the MP in the HP 9000
rp7420 Server. The MP monitors the activity of either a one partition or a multiple-partition configuration.
During installation, communicating with the MP enables such tasks as:
•
Verifying that the components are present and installed correctly
•
Setting LAN IP addresses
•
Shutting down cell board power
Communication with the MP is established by connecting the CE Tool to the local RS-232 port on the MP
Core I/O card.
Setting CE Tool Parameters
After powering on the CE Tool, ensure the communications settings are as follows:
•
8/none (parity)
•
9600 baud
•
na (Receive)
•
na (Transmit)