HP Server rp7420 Installation Guide, Fifth Edition - HP 9000 rp7420 Server - Page 69
Configuring LAN Information for the MP, MP Main Menu
View all HP Server rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
The MP Main Menu is displayed: Figure 4-7 MP Main Menu Cabling and Power Up MP Core I/O Connections Configuring LAN Information for the MP To set the MP LAN IP address: 1. At the MP Main Menu prompt (MP>), enter cm. From the MP Command Menu prompt (MP:CM>), enter lc (for LAN configuration). The default values are displayed, and a prompt, asking if default values are to be modified, is displayed. It is a good idea to write down the information, because it might be required for future troubleshooting. NOTE If the Command Menu is not shown, enter q to return to the MP Main Menu, then enter cm.. Chapter 4 69
Chapter 4
Cabling and Power Up
MP Core I/O Connections
69
The MP Main Menu is displayed:
Figure 4-7 MP Main Menu
Configuring LAN Information for the MP
To set the MP LAN IP address:
1. At the MP Main Menu prompt (MP>), enter
cm
.
From the MP Command Menu prompt (MP:CM>), enter
lc
(for LAN configuration).
The default values are displayed, and a prompt, asking if default values are to be modified, is displayed.
It is a good idea to write down the information, because it might be required for future troubleshooting.
NOTE
If the Command Menu is not shown, enter
q
to return to the MP Main Menu, then enter
cm
..