Home » HP Manuals » Desktops » HP Slate 21-k100 » Manual Viewer

HP Slate 21-k100 HP Slate 21 All-in-One User Guide - Page 12

It is important to verify that the manufacturer's mounting solution is compliant with the VESA

Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

4. Align the screw holes on the mounting fixture with the VESA holes on the back of the all-in-one, and then insert four 10 mm screws (not provided) through the holes on the mounting fixture and into the mounting holes on the all-in-one. CAUTION: This all-in-one supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the all-in-one, four 4 mm, 0.7 pitch, and 10 mm long screws are required. Longer screws must not be used because they may damage the all-in-one. It is important to verify that the manufacturer's mounting solution is compliant with the VESA standard and is rated to support the weight of the all-in-one. For best performance, it is important to use the power and video cables provided with the all-in-one. 6 Chapter 2 Setting up the hardware

Section	Page
Product features	7
Front components	8
Rear components	9
Setting up the hardware	10
Preparing for desk use	10
Preparing for wall mounting	10
Connecting the cables	13
Adjusting the tilt	16
Turning on the all-in-one for the first time	17
Using the touchscreen	18
One-finger slide	18
Tapping	18
Pinching/stretching	18
Rotating	19
Swipes	19
Connecting to networks	20
Connecting to wireless networks	20
Connecting to wired networks	21
Bluetooth	21
Using the user interface	22
Browsing the internet	23
Playing media	23
Using the camera	24
Printing	24
Adjusting the settings	24
Date/time settings	24
Security settings	25
Screen lock	25
Encryption	25
Sound settings	25
Language	26
Updating the software	26
Backup & reset	26
Backup & restore	26
Factory data reset	27
Enabling input method editor (IME)	27
Safety and Maintenance Guidelines	28
Important Safety Information	28
Maintenance guidelines	28
Cleaning the all-in-one	29
Shipping the all-in-one	29
Frequently asked questions	30
Product support	31
Technical specifications	32
HP Slate 21 All-in-One	32
Energy saver feature	33
Agency Regulatory Notices	34
Federal Communications Commission Notice	34
Modifications	34
Cables	34
Declaration of Conformity for Products Marked with the FCC Logo (United States Only)	34
Canadian Notice	35
Avis Canadien	35
European Union Regulatory Notice	36
German Ergonomics Notice	36
Japanese Notice	36
Korean Notice	36
Power Cord Set Requirements	37
Japanese Power Cord Requirements	37
Product Environmental Notices	37
ENERGY STAR® Qualification	37
Materials Disposal	38
Disposal of Waste Equipment by Users in Private Household in the European Union	38
HP Recycling Program	38
Chemical Substances	38
Restriction of Hazardous Substances (RoHS)	39
Turkey EEE Regulation	39

Match case Limit results 1 per page

Align the screw holes on the mounting fixture with the VESA holes on the back of the all-in-one,

and then insert four 10 mm screws (not provided) through the holes on the mounting fixture and

into the mounting holes on the all-in-one.

CAUTION:

This all-in-one supports the VESA industry standard 100 mm mounting holes. To

attach a third-party mounting solution to the all-in-one, four 4 mm, 0.7 pitch, and 10 mm long

screws are required. Longer screws must not be used because they may damage the all-in-one.

It is important to verify that the manufacturer’s mounting solution is compliant with the VESA

standard and is rated to support the weight of the all-in-one. For best performance, it is important

to use the power and video cables provided with the all-in-one.

Chapter 2

Setting up the hardware