HP SlateBook 10-h010nr HP SlateBook 10 x2 PC Maintenance and Service Guide - Page 32
Power button board, Disconnect all external devices from the tablet.
View all HP SlateBook 10-h010nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4. Detach the wireless antenna transceivers (4) from the surfaces of the battery and the display panel frame. (The wireless antenna transceiver is attached to the surfaces of the battery and the display panel frame with double-sided tape.) 5. Remove the wireless antenna. Reverse this procedure to install the wireless antenna. Power button board Description Power button board (includes cable) Spare part number 728150-001 Before removing the power button board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display enclosure (see Display enclosure on page 20). 5. Disconnect the battery cable from the system board (see Rear webcam on page 21). 26 Chapter 4 Removal and replacement procedures preliminary requirements