HP SlateBook 10-h010nr HP SlateBook 10 x2 PC Maintenance and Service Guide - Page 49

TouchPad, Remove the TouchPad

Get HP SlateBook 10-h010nr PDF manuals and user guides View all HP SlateBook 10-h010nr manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

TouchPad Description TouchPad (includes cable) Spare part number 728149-001 Before removing the TouchPad, follow these steps: 1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the tablet and keyboard base. 3. Disconnect the tablet from the keyboard base. 4. Remove the bottom cover (see Bottom cover on page 36). 5. Remove the battery (see Battery on page 37). Remove the TouchPad: 1. Release the ZIF connector (1) to which the TouchPad cable is attached, and then disconnect the TouchPad cable from the docking board. 2. Detach the TouchPad cable (2) from the keyboard/top cover. (The TouchPad cable is attached to the keyboard/top cover with double-sided adhesive.) 3. Remove the two Phillips PM2.0×2.3 broad head screws (3) that secure the TouchPad to the keyboard/top cover. 4. Remove the TouchPad (4) by pressing it through the keyboard/top cover. Reverse this procedure to install the TouchPad. Removal and replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
TouchPad
Description
Spare part number
TouchPad (includes cable)
728149-001
Before removing the TouchPad, follow these steps:
1.
Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are
off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.
Disconnect the power from the tablet and keyboard base by unplugging the power cord from the
tablet and keyboard base.
3.
Disconnect the tablet from the keyboard base.
4.
Remove the bottom cover (see
Bottom cover
on page
36
).
5.
Remove the battery (see
Battery
on page
37
).
Remove the TouchPad:
1.
Release the ZIF connector
(1)
to which the TouchPad cable is attached, and then disconnect the
TouchPad cable from the docking board.
2.
Detach the TouchPad cable
(2)
from the keyboard/top cover. (The TouchPad cable is attached to
the keyboard/top cover with double-sided adhesive.)
3.
Remove the two Phillips PM2.0×2.3 broad head screws
(3)
that secure the TouchPad to the
keyboard/top cover.
4.
Remove the TouchPad
(4)
by pressing it through the keyboard/top cover.
Reverse this procedure to install the TouchPad.
Removal and replacement procedures
43