HP SlateBook 10-h010nr HP SlateBook 10 x2 PC Maintenance and Service Guide - Page 40
System board, and then remove
View all HP SlateBook 10-h010nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
5. Remove the speakers (5). Reverse this procedure to install the speakers. System board Description Equipped with an NVIDIA T40S 1.8-GHz processor (4-plus-1, quad), 64-GB of memory, and a graphics subsystem with UMA memory (includes WLAN module and replacement thermal material) Equipped with an NVIDIA T40S 1.8-GHz processor (4-plus-1, quad), 32-GB of memory, and a graphics subsystem with UMA memory (includes WLAN module and replacement thermal material) Equipped with an NVIDIA T40S 1.8-GHz processor (4-plus-1, quad), 16-GB of memory, and a graphics subsystem with UMA memory (includes WLAN module and replacement thermal material) Spare part number 728158-001 728157-001 728156-001 Before removing the system board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display enclosure (see Display enclosure on page 20), and then remove the following components: a. Rear webcam (see Rear webcam on page 21) b. Front webcam (see Front webcam on page 23) 34 Chapter 4 Removal and replacement procedures preliminary requirements