HP SlateBook 10-h010nr HP SlateBook 10 x2 PC Maintenance and Service Guide - Page 47

Docking board, Media card reader board cable

Get HP SlateBook 10-h010nr PDF manuals and user guides View all HP SlateBook 10-h010nr manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Docking board Description Docking board Spare part number 728155-001 Before removing the docking board, follow these steps: 1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the tablet and keyboard base. 3. Disconnect the tablet from the keyboard base. 4. Remove the bottom cover (see Bottom cover on page 36). 5. Disconnect the battery cable from the docking board (see Battery on page 37). 6. Remove the hinge assembly (see Hinge assembly on page 39). Remove the docking board: 1. Disconnect the following cables from the docking board ZIF connectors: (1) Media card reader board cable (2) Keyboard cable (3) TouchPad cable 2. Remove the eight Phillips PM2.0×2.5 screws (1) that secure the docking board to the keyboard/ top cover. Removal and replacement procedures 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Docking board
Description
Spare part number
Docking board
728155-001
Before removing the docking board, follow these steps:
1.
Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are
off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.
Disconnect the power from the tablet and keyboard base by unplugging the power cord from the
tablet and keyboard base.
3.
Disconnect the tablet from the keyboard base.
4.
Remove the bottom cover (see
Bottom cover
on page
36
).
5.
Disconnect the battery cable from the docking board (see
Battery
on page
37
).
6.
Remove the hinge assembly (see
Hinge assembly
on page
39
).
Remove the docking board:
1.
Disconnect the following cables from the docking board ZIF connectors:
(1)
Media card reader board cable
(2)
Keyboard cable
(3)
TouchPad cable
2.
Remove the eight Phillips PM2.0×2.5 screws
(1)
that secure the docking board to the keyboard/
top cover.
Removal and replacement procedures
41