HP Spectre 13-3018ca HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 36
Bottom cover, that secure the bottom cover to the computer.
View all HP Spectre 13-3018ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Bottom cover Description Bottom cover Spare part number 744360-001 Before removing the bottom cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. Remove the bottom cover: 1. Position the computer upside-down. 2. Remove the 8 Torx T5M2.0×3.0 screws (1) that secure the bottom cover to the computer. 3. Lift the bottom cover off the computer (2). Reverse the removal procedures to install the bottom cover. 28 Chapter 4 Removal and replacement procedures
Bottom cover
Description
Spare part number
Bottom cover
744360-001
Before removing the bottom cover, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
Remove the bottom cover:
1.
Position the computer upside-down.
2.
Remove the 8 Torx T5M2.0×3.0 screws
(1)
that secure the bottom cover to the computer.
3.
Lift the bottom cover off the computer
(2)
.
Reverse the removal procedures to install the bottom cover.
28
Chapter 4
Removal and replacement procedures