HP Spectre 13-3018ca HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 44

Speaker assembly, Remove one Phillips PM2.5×4.0 screw

Get HP Spectre 13-3018ca PDF manuals and user guides View all HP Spectre 13-3018ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Speaker assembly Description Speaker assembly (includes cable) Spare part number 744377-001 Before removing the speaker assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery. Remove the speaker assembly: 1. Disconnect the speaker cable from the system board (1). 2. Remove the Mylar from atop the wire between the speakers (2). 3. Remove one Phillips PM2.5×4.0 screw (3) from each speaker. 36 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Speaker assembly
Description
Spare part number
Speaker assembly (includes cable)
744377-001
Before removing the speaker assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
28
).
5.
Disconnect the battery.
Remove the speaker assembly:
1.
Disconnect the speaker cable from the system board
(1)
.
2.
Remove the Mylar from atop the wire between the speakers
(2)
.
3.
Remove one Phillips PM2.5×4.0 screw
(3)
from each speaker.
36
Chapter 4
Removal and replacement procedures