HP Spectre 13-3018ca HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 59

Power button board, that secures the power button board to the computer.

Get HP Spectre 13-3018ca PDF manuals and user guides View all HP Spectre 13-3018ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Power button board Description Power button board (includes cable and plastic power button) Spare part number 744370-001 Before removing the power button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Bottom cover (see Bottom cover on page 28) b. Battery (see Battery on page 45) c. WLAN module (see WLAN module on page 31) d. Fan (see Fan on page 40) e. System board (see System board on page 47) Remove the power button board: 1. Remove the Phillips PM2.0×3.0 screw (1) that secures the power button board to the computer. 2. Pull up on the cable to disconnect it from the adhesive that secures it to the computer (2). Component replacement procedures 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Power button board
Description
Spare part number
Power button board (includes cable and plastic power button)
744370-001
Before removing the power button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Bottom cover (see
Bottom cover
on page
28
)
b.
Battery (see
Battery
on page
45
)
c.
WLAN module (see
WLAN module
on page
31
)
d.
Fan (see
Fan
on page
40
)
e.
System board (see
System board
on page
47
)
Remove the power button board:
1.
Remove the Phillips PM2.0×3.0 screw
(1)
that secures the power button board to the computer.
2.
Pull up on the cable to disconnect it from the adhesive that secures it to the computer
(2)
.
Component replacement procedures
51