HP Spectre 13-3018ca HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 56
Remove the 4 Phillips PM2.0×3.0 screws, Remove the system board
View all HP Spectre 13-3018ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Remove the system board: 1. Disconnect the following cables from the system board. ● (1): Display cable ● (2): Power connector cable ● (3): Large keyboard cable ● (4): Small keyboard cable ● (5): Power button board cable ● (6): Speaker cable ● (7): Control cable 2. Lift the Mylar tape (1) to gain access to one of the screws (2). 3. Remove the 4 Phillips PM2.0×3.0 screws (2) that secure the system board to the computer. 4. Remove the Phillips PM2.0×3.0 broadhead screw (3) that secures the system board to the computer. 5. Lift the left side of the board (4). 48 Chapter 4 Removal and replacement procedures
Remove the system board:
1.
Disconnect the following cables from the system board.
●
(1)
: Display cable
●
(2)
: Power connector cable
●
(3)
: Large keyboard cable
●
(4)
: Small keyboard cable
●
(5)
: Power button board cable
●
(6)
: Speaker cable
●
(7)
: Control cable
2.
Lift the Mylar tape
(1)
to gain access to one of the screws
(2)
.
3.
Remove the 4 Phillips PM2.0×3.0 screws
(2)
that secure the system board to the computer.
4.
Remove the Phillips PM2.0×3.0 broadhead screw
(3)
that secures the system board to
the computer.
5.
Lift the left side of the board
(4)
.
48
Chapter 4
Removal and replacement procedures