HP Spectre 13-3018ca HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 37
Solid-state drive (SSD), Remove the Phillips PM2.0×3.0 screw
View all HP Spectre 13-3018ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Solid-state drive (SSD) Description 512-GB mSATA, SSD 256-GB mSATA, SSD 128-GB mSATA, SSD Spare part number 744380-001 744379-001 744378-001 Before removing the solid-state drive module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery. Remove the solid-state drive: 1. Remove the Phillips PM2.0×3.0 screw (1) that secures the drive to the computer. The rear of the drive pops up. Component replacement procedures 29