HP Spectre 13-3018ca HP Spectre 13 Ultrabook - Maintenance and Service Guide - Page 53

Battery, Remove the 4 Phillips PM2.0×3.0 screws

Get HP Spectre 13-3018ca PDF manuals and user guides View all HP Spectre 13-3018ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Battery Description Battery, 4-cell, 51-Wh, 3.42-Ah Spare part number 734998-001 Before disassembling the computer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). Remove the battery: 1. Disconnect the battery cable from the system board (1). 2. Remove the Mylar from atop the broadhead screw near the top of the battery (2). 3. Remove the 2 Phillips PM2.0×3.0 broadhead screws (3) that secure the battery to the computer. 4. Remove the 2 Phillips PM2.0×4.0 screws (4) that secure the battery to the computer. 5. Remove the 4 Phillips PM2.0×3.0 screws (5) along the bottom of the battery that secure it to the computer. Component replacement procedures 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Battery
Description
Spare part number
Battery, 4-cell, 51-Wh, 3.42-Ah
734998-001
Before disassembling the computer, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
28
).
Remove the battery:
1.
Disconnect the battery cable from the system board
(1)
.
2.
Remove the Mylar from atop the broadhead screw near the top of the battery
(2)
.
3.
Remove the 2 Phillips PM2.0×3.0 broadhead screws
(3)
that secure the battery to the computer.
4.
Remove the 2 Phillips PM2.0×4.0 screws
(4)
that secure the battery to the computer.
5.
Remove the 4 Phillips PM2.0×3.0 screws
(5)
along the bottom of the battery that secure it to the
computer.
Component replacement procedures
45