HP Spectre 13-ae000 Maintenance and Service Guide - Page 38
Two Torx T4 M2.0×3.2 screws, One Phillips M2.5×5.6 screw
View all HP Spectre 13-ae000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
● 942846-001 - In dark ash silver finish ● 942847-001 - In natural silver finish ● L07274-001 - In pale rose gold finish 2. Remove the following screws that secure the bottom cover to the computer: (2) Two Torx T4 M2.0×3.2 screws (3) One Phillips M2.5×5.6 screw (4) Two Phillips M2.0×2.8 screws (5) One Phillips M2.5×4.1 screw 3. Use a case utility tool (1) or similar thin, plastic tool to separate the front edge of the bottom cover from the keyboard/top cover. 4. Remove the bottom cover (2). Reverse this procedure to install the bottom cover. 30 Chapter 5 Removal and replacement procedures
●
942846-001 – In dark ash silver
finish
●
942847-001 – In natural silver
finish
●
L07274-001 – In pale rose gold
finish
2.
Remove the following screws that secure the bottom cover to the computer:
(2)
Two Torx T4 M2.0×3.2 screws
(3)
One Phillips M2.5×5.6 screw
(4)
Two Phillips M2.0×2.8 screws
(5)
One Phillips M2.5×4.1 screw
3.
Use a case utility tool
(1)
or similar thin, plastic tool to separate the front edge of the bottom cover from
the keyboard/top cover.
4.
Remove the bottom cover
(2)
.
Reverse this procedure to install the bottom cover.
30
Chapter 5
Removal and replacement procedures