HP Spectre 13-ae000 Maintenance and Service Guide - Page 57
Card reader board cable, the card reader board cable from the card reader board.
View all HP Spectre 13-ae000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Card reader board cable Description Card reader board cable (includes double-sided adhesive) Spare part number 942830-001 Before removing the card reader board cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 29). 5. Remove the battery (see Battery on page 31). Remove the card reader board cable: 1. Release the ZIF connector (1) to which the card reader board cable is connected, and then disconnect the card reader board cable from the system board. 2. Release the ZIF connector (2) to which the card reader board cable is connected, and then disconnect the card reader board cable from the card reader board. 3. Detach the card reader board cable (3) from the keyboard/top cover. (The card reader board cable is attached to the keyboard/top cover with double-sided adhesive.) 4. Remove the card reader board cable. Reverse this procedure to install the card reader board cable. Component replacement procedures 49