HP Spectre 13-ae000 Maintenance and Service Guide - Page 63
and the heat sink that services it.
View all HP Spectre 13-ae000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
3. Remove the heat sink (2). NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system board components each time the heat sink is removed. Replacement thermal material is included with the heat sink and system board spare part kits. Thermal paste is used on the processor (1) and the heat sink section (2) that services it. Reverse this procedure to install the heat sink. Component replacement procedures 55
3.
Remove the heat sink
(2)
.
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the heat sink and
the system board components each time the heat sink is removed. Replacement thermal material is
included with the heat sink and system board spare part kits.
Thermal paste is used on the processor
(1)
and the heat sink section
(2)
that services it.
Reverse this procedure to install the heat sink.
Component replacement procedures
55