HP Spectre 13-ae000 Maintenance and Service Guide - Page 46
Infrared sensor board, Remove the right fan see
View all HP Spectre 13-ae000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Reverse this procedure to install the infrared sensor board cable. Infrared sensor board NOTE: The infrared sensor board spare part kit does not include the infrared sensor board cable. The infrared sensor board cable is available using spare part number 942832-001. Description Infrared sensor board Spare part number 942831-001 Before removing the infrared sensor board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 29). 5. Disconnect the battery cable from the system board (see Battery on page 31). 6. Remove the right fan (see Fans on page 35). Remove the infrared sensor board: 1. Turn the right fan upside down. 2. Detach the infrared sensor board from the right fan. (The infrared sensor board is attached to the right fan with double-sided adhesive.) Reverse this procedure to install the infrared sensor board. 38 Chapter 5 Removal and replacement procedures