HP Spectre 13-ae000 Maintenance and Service Guide - Page 45
Infrared sensor board cable, Release the ZIF connector
View all HP Spectre 13-ae000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Infrared sensor board cable Description Infrared sensor board cable Spare part number 942832-001 Before removing the infrared sensor board cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 29). 5. Disconnect the battery cable from the system board (see Battery on page 31). 6. Remove the right fan (see Fans on page 35). Remove the infrared sensor board cable: 1. Turn the right fan upside down. 2. Release the ZIF connector (1) to which infrared sensor board cable is connected, and then disconnect the infrared sensor board cable from the infrared sensor board. 3. Release the infrared sensor board cable from the retention clip (2) built into the right fan. 4. Remove the infrared sensor board cable (3). 5. Remove the infrared sensor board cable. Component replacement procedures 37