HP Spectre 13-ae000 Maintenance and Service Guide - Page 62

Heat sink, Battery see

Get HP Spectre 13-ae000 PDF manuals and user guides View all HP Spectre 13-ae000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Heat sink Description Heat sink (includes the replacement thermal material) Spare part number 942841-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 29), and then remove the following components: a. Battery (see Battery on page 31) b. Solid-state drive (see Solid-state drive on page 33) c. Fans (see Fans on page 35) d. System board (see System board on page 51) Remove the heat sink: 1. Turn the system board upside down with the front toward you. 2. Remove the three Phillips M2.0×2.8 screws (1) that secure the heat sink to the system board. 54 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
Heat sink
Description
Spare part number
Heat sink (includes the replacement thermal material)
942841-001
Before removing the heat sink, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
29
), and then remove the following components:
a.
Battery (see
Battery
on page
31
)
b.
Solid-state drive (see
Solid-state drive
on page
33
)
c.
Fans (see
Fans
on page
35
)
d.
System board (see
System board
on page
51
)
Remove the heat sink:
1.
Turn the system board upside down with the front toward you.
2.
Remove the three Phillips M2.0×2.8 screws
(1)
that secure the heat sink to the system board.
54
Chapter 5
Removal and replacement procedures