HP Spectre 13-ae000 Maintenance and Service Guide - Page 47

Audio jack board cable, Remove the audio jack board cable

Get HP Spectre 13-ae000 PDF manuals and user guides View all HP Spectre 13-ae000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Audio jack board cable Description Audio jack board cable Spare part number 942832-001 Before removing the audio jack board cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 29). 5. Disconnect the battery cable from the system board (see Battery on page 31). Remove the audio jack board cable: 1. Release the ZIF connector (1) to which audio jack board cable is connected, and then disconnect the audio jack board cable from the system board. 2. Release the ZIF connector (2) to which audio jack board cable is connected, and then disconnect the audio jack board cable from the audio jack board. 3. Remove the audio jack board cable (3). Reverse this procedure to install the audio jack board cable. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
Audio jack board cable
Description
Spare part number
Audio jack board cable
942832-001
Before removing the audio jack board cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
29
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
31
).
Remove the audio jack board cable:
1.
Release the ZIF connector
(1)
to which audio jack board cable is connected, and then disconnect the audio
jack board cable from the system board.
2.
Release the ZIF connector
(2)
to which audio jack board cable is connected, and then disconnect the audio
jack board cable from the audio jack board.
3.
Remove the audio jack board cable
(3)
.
Reverse this procedure to install the audio jack board cable.
Component replacement procedures
39