HP Spectre XT TouchSmart Ultrabook CTO 15t-4000 HP SpectreXT TouchSmart Mainte - Page 43

Battery, from the system board.

Get HP Spectre XT TouchSmart Ultrabook CTO 15t-4000 PDF manuals and user guides View all HP Spectre XT TouchSmart Ultrabook CTO 15t-4000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Battery Description 4-cell, 48-Wh, 3.27-Ah battery (Li-ion) Spare part number 697311-001 Before removing the battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 33). Remove the battery: 1. Detach the multimedia cable (1) from the battery. (The multimedia cable is attached to the battery with double-sided tape.) 2. Disconnect the battery cable (2) from the system board. 3. Remove the four Phillips PM2.0×3.0 screws (3) that secure the battery to the top cover. 4. Remove the battery (4) from the computer. Reverse this procedure to install the battery. Component replacement procedures 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
Battery
Description
Spare part number
4-cell, 48-Wh, 3.27-Ah battery (Li-ion)
697311-001
Before removing the battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
33
).
Remove the battery:
1.
Detach the multimedia cable
(1)
from the battery. (The multimedia cable is attached to the battery
with double-sided tape.)
2.
Disconnect the battery cable
(2)
from the system board.
3.
Remove the four Phillips PM2.0×3.0 screws
(3)
that secure the battery to the top cover.
4.
Remove the battery
(4)
from the computer.
Reverse this procedure to install the battery.
Component replacement procedures
35