HP Spectre XT TouchSmart Ultrabook CTO 15t-4000 HP SpectreXT TouchSmart Mainte - Page 48

Solid-state drive, Remove the solid-state drive

Get HP Spectre XT TouchSmart Ultrabook CTO 15t-4000 PDF manuals and user guides View all HP Spectre XT TouchSmart Ultrabook CTO 15t-4000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Solid-state drive Description 256-GB 128-GB 32-GB Spare part number 700813-001 700812-001 700811-001 Before removing the solid-state drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 33). 5. Disconnect the battery cable from the system board (see Battery on page 35). Remove the solid-state drive: 1. Remove the two Phillips PM2.0×4.5 screws (1) that secure the solid-state drive to the top cover. (The solid-state drive tilts up.) 2. Remove the solid-state drive (3) by pulling the drive away from the slot at an angle. Reverse this procedure to install the solid-state drive. 40 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
Solid-state drive
Description
Spare part number
256-GB
700813-001
128-GB
700812-001
32-GB
700811-001
Before removing the solid-state drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
33
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
35
).
Remove the solid-state drive:
1.
Remove the two Phillips PM2.0×4.5 screws
(1)
that secure the solid-state drive to the top cover.
(The solid-state drive tilts up.)
2.
Remove the solid-state drive
(3)
by pulling the drive away from the slot at an angle.
Reverse this procedure to install the solid-state drive.
40
Chapter 4
Removal and replacement procedures