HP Spectre XT TouchSmart Ultrabook CTO 15t-4000 HP SpectreXT TouchSmart Mainte - Page 56
that secure the display panel to, Remove the two Phillips PM2.0×2.5 screws
View all HP Spectre XT TouchSmart Ultrabook CTO 15t-4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
10. If it is necessary to replace the display panel: a. Remove the two Phillips PM1.5×2.0 screws (1) that secure the hinge covers to the display enclosure. b. Remove the left and right hinge covers (2) from the display enclosure. The hinge covers are included in the display enclosure spare part kit, spare part number 700797-001. c. Remove the two Phillips PM2.0×2.5 screws (1) that secure the display panel to the display enclosure. d. Slide the display panel (2) toward the bottom of the display enclosure until the tabs on the left and right sides of the panel disengage from the slots built into the display enclosure. 48 Chapter 4 Removal and replacement procedures
10.
If it is necessary to replace the display panel:
a.
Remove the two Phillips PM1.5×2.0 screws
(1)
that secure the hinge covers to
the display enclosure.
b.
Remove the left and right hinge covers
(2)
from the display enclosure.
The hinge covers are included in the display enclosure spare part kit, spare part number
700797-001.
c.
Remove the two Phillips PM2.0×2.5 screws
(1)
that secure the display panel to
the display enclosure.
d.
Slide the display panel
(2)
toward the bottom of the display enclosure until the tabs on
the left and right sides of the panel disengage from the slots built into the display enclosure.
48
Chapter 4
Removal and replacement procedures