HP Spectre XT TouchSmart Ultrabook CTO 15t-4000 HP SpectreXT TouchSmart Mainte - Page 51
Hard drive, Remove the hard drive
View all HP Spectre XT TouchSmart Ultrabook CTO 15t-4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive connector cable, or screws. These components are included in the Hard Drive Hardware Kit, spare part number 700805-001. Description 500-GB, 7200-rpm, 7.0-mm hard drive 500-GB, 5400-rpm, 7.0-mm hard drive Spare part number 703267-001 683802-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 33). 5. Disconnect the battery cable from the system board (see Battery on page 35). Remove the hard drive: 1. Disconnect the hard drive cable (1) from the system board. 2. Remove the three Phillips PM2.5×5.5 screws (2) that secure the hard drive to the top cover. Component replacement procedures 43