HP Split 13-g118ca HP Split 13 x2 PC Maintenance and Service Guide - Page 46
Webcamera/microphone module, Remove the Phillips PM2.0×3.0 screw
View all HP Split 13-g118ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Remove the proximity sensor module: 1. Disconnect the proximity sensor module cable (1) from the system board. 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the proximity sensor module to the display assembly. 3. Remove the proximity sensor module (3) and cable. Reverse this procedure to install the proximity sensor module. Webcamera/microphone module Description Spare part number Webcamera/microphone module (includes double-sided adhesive and grounding tape) 736900-001 NOTE: The webcamera/microphone module does not include the webcamera/microphone module cable. The webcamera/microphone module cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 21 for more Cable Kit spare part information. Before removing the webcamera/microphone module, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 38 Chapter 4 Removal and replacement preliminary requirements