HP Split 13-g118ca HP Split 13 x2 PC Maintenance and Service Guide - Page 67
display assembly., and routing channel built into
View all HP Split 13-g118ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
d. WWAN module (see WWAN module on page 43) e. Volume button board (see Volume button board on page 47) Remove the wireless antenna cables and transceivers: 1. Disconnect the WLAN antenna cables (1) from the WLAN module. 2. Release the wireless antenna cables from the retention clips (2) and routing channel built into the display assembly. 3. Detach the wireless antenna transceivers (3) from the display assembly. (The wireless antenna transceivers are attached to the display assembly with double-sided adhesive.) Reverse this procedure to install the wireless antenna cables and transceivers. Removal and replacement procedures 59
d.
WWAN module (see
WWAN module
on page
43
)
e.
Volume button board (see
Volume button board
on page
47
)
Remove the wireless antenna cables and transceivers:
1.
Disconnect the WLAN antenna cables
(1)
from the WLAN module.
2.
Release the wireless antenna cables from the retention clips
(2)
and routing channel built into the
display assembly.
3.
Detach the wireless antenna transceivers
(3)
from the display assembly. (The wireless antenna
transceivers are attached to the display assembly with double-sided adhesive.)
Reverse this procedure to install the wireless antenna cables and transceivers.
Removal and replacement procedures
59