HP Split 13-g118ca HP Split 13 x2 PC Maintenance and Service Guide - Page 48
micro Solid-state drive (mSSD
View all HP Split 13-g118ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
micro Solid-state drive (mSSD) Description 128-GB mSSD 64-GB mSSD Spare part number 737218-001 737217-001 Before removing the solid-state drive, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 34). 5. Remove the tablet battery (see Tablet battery on page 36). Remove the solid-state drive: 1. Remove the Phillips PM2.0×3.0 screw (1) that secures the solid-state drive to the system board. (The solid-state drive tilts up.) 2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle. 40 Chapter 4 Removal and replacement preliminary requirements