HP Split 13-g118ca HP Split 13 x2 PC Maintenance and Service Guide - Page 53
Power button board, attached, and then disconnect the power button board cable from the system board.
View all HP Split 13-g118ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Power button board Description Power button board NOTE: The power button board does not include the power button board cable. The power button board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 21 for more Cable Kit spare part information. Spare part number 736889-001 Before removing the power button board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 34). 5. Remove the tablet battery (see Tablet battery on page 36). Remove the power button board: 1. Release the zero insertion force (ZIF) connector (1) to which the power button board cable is attached, and then disconnect the power button board cable from the system board. 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the power button board to the display assembly. 3. Remove the power button board (3) and cable. Reverse this procedure to install the power button board. Removal and replacement procedures 45