HP Split 13-g118ca HP Split 13 x2 PC Maintenance and Service Guide - Page 55
Volume button board, Release the ZIF connector
View all HP Split 13-g118ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Volume button board Description Volume button board (includes cable) NOTE: The volume button board does not include the volume button board cable. The volume button board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 21 for more Cable Kit spare part information. Spare part number 736893-001 Before removing the volume button board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 34). 5. Remove the tablet battery (see Tablet battery on page 36). Remove the volume button board: 1. Release the ZIF connector (1) to which the volume button board cable is attached, and then disconnect the volume button board cable from the system board. 2. Remove the two Phillips PM2.0×3.0 screws (2) that secure the volume button board to the display assembly. Removal and replacement procedures 47