HP Split 13-g118ca HP Split 13 x2 PC Maintenance and Service Guide - Page 57
NFC module, and then shut it down through the operating system.
View all HP Split 13-g118ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Remove the TouchScreen board: 1. Release the two TouchScreen board ZIF connectors (1) and (2) to which the display panel TouchScreen cables are attached, and then disconnect the display panel TouchScreen cables from the TouchScreen board. 2. Release the system board ZIF connector (3) to which the TouchScreen board cable is attached, and then disconnect the TouchScreen board cable from the system board. 3. Detach the TouchScreen board (4) from the display assembly. (The TouchScreen board is attached to the display assembly with double-sided adhesive.) 4. Remove the TouchScreen board and cable. Reverse this procedure to install the TouchScreen board. NFC module Description NFC module (includes double-sided adhesive) NOTE: The NFC module does not include the NFC module cable. The NFC module cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 21 for more Cable Kit spare part information. Spare part number 736886-001 Before removing the NFC module, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 34). 5. Remove the tablet battery (see Tablet battery on page 36). Removal and replacement procedures 49