HP Split 13-g118ca HP Split 13 x2 PC Maintenance and Service Guide - Page 51
WWAN module, terminal labeled 5. The WWAN antenna cable labeled 6 connects to the WWAN module
View all HP Split 13-g118ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
WWAN module Description HP hs3110 HSPA+ Mobile Broadband Module HP lt4112 LTE/HPSA+ Mobile Broadband Module Spare part number 723895-006 740011-006 Before removing the WWAN module, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 34). 5. Remove the tablet battery (see Tablet battery on page 36). Remove the WWAN module: 1. Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module. NOTE: The WWAN antenna cable labeled "5" connects to the WWAN module "Main" terminal labeled "5". The WWAN antenna cable labeled "6" connects to the WWAN module "Aux/GPS" terminal labeled "6". 2. Remove the Phillips PM2.0×2.5 broad head screw (2) that secures the WWAN module to the system board. (The WWAN module tilts up.) Removal and replacement procedures 43