HP StorageWorks 2/8-EL SAN Switch 2/8 V3.1.x - Installation Guide - Page 31
Cooling Requirements, Input voltage frequency of 47-63 Hz
View all HP StorageWorks 2/8-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installing the SAN Switch 2/8 Cooling Requirements Caution: Do not block air vents. Blocking switch air vents may result in the switch overheating. Cooling air is drawn into the switch chassis by the fans mounted on the rear of the chassis. The air is expelled through vents in the front of the chassis. HP recommends installing the switch so that air intake and exhaust for all components in the rack is flowing in the same direction. Power Requirements One AC power cord connects to the switch. The AC power source must meet these requirements: ■ A properly wired, earth-grounded AC outlet ■ Voltage capability of 85-264 VAC ■ Input voltage frequency of 47-63 Hz ■ Power capability of 75 watts, maximum The switch uses a universal power supply capable of functioning worldwide without voltage jumpers or switches. The power supply is auto ranging in terms of accommodating input voltages and line frequencies. SAN Switch 2/8 Version 3.1.x Installation Guide 31