HP StorageWorks 2/8-EL SAN Switch 2/8 V3.1.x - Installation Guide - Page 54
Installing the switch into a rack (HP 9000 Series or comparable EIA rack)
![]() |
View all HP StorageWorks 2/8-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Installing the SAN Switch 2/8 6. Insert the switch with the attached inner rails into the outer rails. Note: This step applies to both the HP System/e rack and the HP 9000 Series or comparable EIA rack. Figure 21: Installing the switch into a rack (HP 9000 Series or comparable EIA rack) Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers with one on each side. See Figure 21 and Figure 22. 54 SAN Switch 2/8 Version 3.1.x Installation Guide
![](/manual_guide/products/hewlettpackard-storageworks-28el-san-switch-28-v31x-installation-guide-08d8150/54.png)
Installing the SAN Switch 2/8
54
SAN Switch 2/8 Version 3.1.x Installation Guide
6.
Insert the switch with the attached inner rails into the outer rails.
Note:
This step applies to both the HP System/e rack and the HP 9000 Series or
comparable EIA rack.
Figure 21:
Installing the switch into a rack (HP 9000 Series or comparable EIA rack)
Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers with one on each side.
See
Figure 21
and
Figure 22
.