HP StorageWorks 2/8-EL SAN Switch 2/8 V3.1.x - Installation Guide - Page 51
Assembling the outer rails (HP 9000 Series or comparable EIA rack)
![]() |
View all HP StorageWorks 2/8-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Installing the SAN Switch 2/8 b. Depending on the rack you are using, complete one of the following tasks: - For an HP 9000 Series or comparable EIA rack, install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 adapter washers in the upper and lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 adapter washers in the upper and lower hole locations of the left rail. See Figure 18. Figure 18: Assembling the outer rails (HP 9000 Series or comparable EIA rack) SAN Switch 2/8 Version 3.1.x Installation Guide 51
![](/manual_guide/products/hewlettpackard-storageworks-28el-san-switch-28-v31x-installation-guide-08d8150/51.png)
Installing the SAN Switch 2/8
51
SAN Switch 2/8 Version 3.1.x Installation Guide
b.
Depending on the rack you are using, complete one of the following
tasks:
—
For an HP 9000 Series or comparable EIA rack, install two #10-32 x
1/2-inch Phillips pan-head screws with captive star lock washers and two
#10 adapter washers in the upper and lower hole locations of the right rail.
Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive
star lock washers and two #10 adapter washers in the upper and lower
hole locations of the left rail. See
Figure 18
.
Figure 18:
Assembling the outer rails (HP 9000 Series or comparable EIA rack)