HP StorageWorks 2/8-EL SAN Switch 2/8 V3.1.x - Installation Guide - Page 97
Environmental Requirements, Memory Specifications, Main Memory SDRAM: 32 MB per switch
![]() |
View all HP StorageWorks 2/8-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Technical Specifications Environmental Requirements Table 8 lists the environmental ranges that are acceptable when the switch is operating, and the acceptable ranges when the switch is not operating. Table 8: Environmental Requirements Condition Temperature (operating) Temperature (non-operating) Humidity (operating) Humidity (non-operating) Altitude (operating) Altitude (non-operating) Shock (operating) Shock (non-operating) Vibration (operating) Vibration (non-operating) Acceptable Range 10°C to 40°C -25°C to 70°C 20% to 85% RH non condensing, at 40°C 0% to 90% RH non-conducting, at 40°C 0 to 3 kilometers above sea level 0 to 12 kilometers above sea level 4G, 11MS duration, half sine 20G, 11MS duration, sq.wave 5G, 0-3 kHz at 1.0 octave/minute 10G, 0-5kHz at 1.0 octave/minute Memory Specifications The SAN Switch 2/8 uses the following memory. ■ Main Memory (SDRAM): 32 MB per switch ■ Flash Memory: Dual 8 MB ■ Boot Flash: 512K bytes of 8-bit for system boot The centralized memory maximizes the overall switch throughput by guaranteeing full transmit and receive bandwidth to all Fibre Channel ports at all times. SAN Switch 2/8 Version 3.1.x Installation Guide 97
![](/manual_guide/products/hewlettpackard-storageworks-28el-san-switch-28-v31x-installation-guide-08d8150/97.png)