HP StorageWorks 2/8-EL SAN Switch 2/8 V3.1.x - Installation Guide - Page 72
Port Status LED, continued, Port Speed, Fibre Channel
View all HP StorageWorks 2/8-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Managing the SAN Switch 2/8 Table 4: Front Panel LED Patterns During Normal Operation (Continued) LED Port Status LED (continued) Port Speed LED LED Location Above each port, on left Above each port, on right Color Display Fast-flashing green Flickering green Steady orange Slow-flashing orange Fast-flashing orange Flashing green No light Steady green Hardware Status Port is in internal loopback (diagnostic). Port is online. Port is receiving signal carrier, but is not yet online. Port is disabled (result of diagnostics or portDisable command). Port is faulty. Port is bypassed. Port is transmitting at 1 Gbps. Port is transmitting at 2 Gbps. Recommended Action No action required. No action required. No action required. Enable port (via the PortEnable command; refer to the HP StorageWorks Fabric OS Reference. 1. Check port status LEDs, error log, and cable or loopback plug. 2. Clear error log. Check configuration of Fibre Channel loop. No action required. No action required. 72 SAN Switch 2/8 Version 3.1.x Installation Guide