HP StorageWorks 2/8-EL SAN Switch 2/8 V3.1.x - Installation Guide - Page 38
Installing the Switch in the Optional HP System/e Rack, 2 Phillips and T25 Torx screwdrivers
View all HP StorageWorks 2/8-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Installing the SAN Switch 2/8 Installing the Switch in the Optional HP System/e Rack Before you begin, locate the following items to install the SAN Switch 2/8 in the HP System/e Rack Kit: ■ SAN Switch 2/8 ■ #2 Phillips and T25 Torx screwdrivers Caution: For proper airflow, the SFP media side of the SAN Switch 2/8 must face the rear of the rack. This mounting allows air to enter the front of the rack through the plenum and to exhaust at the rear of the rack, preventing overheating. 1. Select a mounting location in the rack for the switch. 2. Attach the rear rail-tray brackets to the rear rack uprights by installing each of the two mounting brackets with one M5 Torx head screw with captive lock washer as shown in Figure 8. 38 SAN Switch 2/8 Version 3.1.x Installation Guide