HP StorageWorks 4/64 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 187
fabPortShow, Operands, Examples, See Also, Neighboring switch's WWN
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Note: Enter commands in lowercase only; mixed case is for readability. fabPortShow 2 nbrWWN nbrPort lr_tid red_ports ECP RJT or retires exceeded 0x100000000 Segmented due to duplicated WWN 0x200000000 Segmented due to E_Port isolation Neighboring switch's WWN Neighboring switch's port Link reset timer identifier and current state. All E_Ports that are connected to the same neighboring switch Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: slotnumber For bladed systems only, specifies the slot number of the port to display, followed by a slash (/). portnumber Specifies the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. To display fabric port information: switch:admin> fabportshow 4/14 Fabric Port Information Port: State: List: List Count: Flags: nbrWWN: nbrPort: lr_tid: red_ports: 10 11 62 63 62 P3 0x10068418 0 0x280120 10:00:00:60:69:80:06:cf 5 0x1005dbd8, IDLE STATE Open commands pending No commands pending See Also portShow Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-153