HP StorageWorks 4/64 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 428
perfAddRWMonitor
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 428 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. perfAddRWMonitor perfAddRWMonitor Adds a filter-based performance monitor for the SCSI read and write commands. Synopsis perfaddrwmonitor [slotnumber/]portnumber [alias] Description Use this command to define filter-based monitors to count the number of SCSI FCP Read and Write commands in Fibre Channel frames. Only frames transmitted are counted. After a successful execution of this command, a monitor number is displayed. The monitor number is provided for manipulation of these filter-based performance monitors. The optional user-defined alias is also displayed, if one was specified. All valid monitor numbers and user-defined aliases can be retrieved with the perfShowFilterMonitor command. The maximum number of filters is eight per port, including user-defined filters, read filters, write filters, read/write filters, SCSI frame monitor, and IP frame monitor. Note This command requires a Brocade Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: slotnumber For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). portnumber Specifies the number of the port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. alias Specify a name for this monitor. This string truncates to a maximum of 10 characters. It might be surrounded by quotation marks, in order to include spaces. This operand is optional. The default alias is "SCSI R/W". Optionally, a comma can separate the operands. A space is required to separate the operands even when using commas. To add an SCSI read and write monitor to a port: switch:admin> perfaddrwmonitor 2/4 "SCSI_RW" SCSI Read/Write monitor #1 is added See Also perfAddEEMonitor, perfAddIPMonitor, perfAddReadMonitor, perfAddSCSIMonitor, perfAddUserMonitor, perfAddWriteMonitor 2-394 Fabric OS Command Reference Manual Publication Number: 53-1000240-01